Smart Watering Irrigation WIFI, Irrigation system installation and repairs, troubleshooting, broken sprinkler/wire locating and repairs, upgrades timers, Rain sensor and emergency Repairs.
Tell us about your landscape irrigation system repairs needs!
Please fill out as much of the information as you can in the fields below and we will get back to you!
Clean Green, Inc. Landscape Irrigation company in Denton county we specialize in irrigation design and Sprinkler Repairs.
Why spend your time doing what we do best? Call now to Clean Green, Inc. for your landscape irrigation design, install, maintenance, sprinkler repair, water leak repair and service in Denton county area, a manner that will promote water conservation , by considering plants and soil types, to how much water to apply to landscapes and when to water. Today's irrigation controllers allow to easily adjusted systems watering schedule to fit different types of needs. In soil types, sloping, turf grass, ground cover, shrubs, trees, new lawns, hydro zoning flower beds and/or season of the year amount of water will need to apply. We can help to maintain and keep greening and healthy your landscape. If you need to speak with Clean Green, Inc. Irrigation experts we have solutions for lawn watering, Call at 972-998-2076
Water conservation! (1) A quick view of what we can do to help you, save water and earn yourself: 1) We offer water audits and/or system tune-up (from ours certified irrigators) (a) Perform audits and determine system efficiency (b) Translate into potential savings in water and dollars based on system enhancements (i) Repair broken heads (ii) Adjust sprinklers overthrowing walks or pathways (iv) Ensure head to head coverage (2) Upgrade sprinkler heads (a) Install matched precipitation rate nozzles (b) Use stream rotary nozzles (c) Install higher efficiency spray nozzles (d) Install higher efficiency rotor nozzles (e) Use check valves for low head drainage sprinkler heads (f) Avoid excessive pressure; use PC sprays, valves or screens (3) Install sensors (a) Rain sensors (b) Wind sensors (c) Moisture sensors (d) Excessive flow sensors (4) Install drip or micro irrigation (5) Upgrade to an ET-based controller (smart controller) (6) Offer new services (a) Rain water harvesting (b) Rain gardens
Irrigation sprinkler repair and service irrigator and technician certificate!
We repair or replace all brands of irrigation sprinkler systems, serving in Aubrey, Prosper, Denton, Frisco, Plano, Little Elm and surrounding areas. We will match most competitor's prices.
Sprinklers sprays watering lawn, shrubs, trees and ground covers!
Drip irrigation system delivery water direct to the root zone!
You can find a Clean Green Inc. With the best prices on irrigation & sprinkler repairs in Denton, Frisco little Elm, Plano or North Dallas area. All landscapes require Irrigation maintenance and sprinkler checking to spray heads coverage 100% watering. Regular care will ensure that everything stays in balance and healthy gardening. Turf grass showing on a dull, appearance and leaves begin to roll when they need water schedules updated or irrigation system checking for broken or leaking sprinkler heads. The best time to water is early morning when winds are calmer and temperatures are lower.
Frisco Landscape Irrigation Modifications;
Modification of irrigation, new planting plants to relandscape irrigation system replacement and adjustments to all north centro texas
Denton Sprinklers and Drainage solution:
In Denton county we can repair any sprinkler or drainage problem. Let us install new drain system to resolve your drainage issues to help protect your landscape and foundation. Custom drainage design. Existing drainage repair and modification or may need a new French drain installed.
Clean Green, Inc. Landscape Irrigation, offers fully solutions to your irrigation problems.
Little Elm, TX 75068 Sprinkler Repair Specialist. We will match any competitor's price on certified irrigators in Frisco, Denton county, Collin county, north Dallas and Fort Worth area. And we offer the best quality in irrigation industry supplies. Spring sprinkler system activation system needs to be reactivated, Midsummer checkup, system checkup during harsh dryness. Lawn Sprinkler Repairs, Services and New Irrigation Installations. Troubleshooting. backflow Installation. Rotors. Valves. Broken Sprinkler Heads. Spray Nozzles. Controller Upgrades. Timers. Drip-irrigation. Micro-Irrigation. Rain - Freeze Sensors. Adjusted and/or replace broken heads. Valve locating and replacement. Emergency Repairs. PVC Pipe Repairs. Irrigation System Addition and Modifications. Detecting Leaks And Water Conservation Technology.
Our Irrigators and/or Technicians are licensed by the State of Texas, TCEQ
If you in Plano, Frisco, Little Elm, Think how much money you can save in your water bill by updating your sprinkler system
Spring activation system needs to be reactivated, Midsummer checkup, system checkup during harsh, dry season.
If you in north Dallas or Denton county, and need Irrigation install, sprinkler system checking include solenoid valves not working or staying on or broken heads main line leaks, lateral pipe leaking, clogged nozzles or problems coverage issues. Call at 972-998-2076 and one of our skilled Irrigation technician trained to address your sprinkler system needed.
Clean Green, Inc. Has the tools and features designed to run irrigation system. Avoid watering too much or too little as weather and seasons changes in north Texas
Weather intelligent selt-Adjustments with WIFI Smart watering WIFI timers, Sprinkler head replace, Sprinkler leak repair Sprinkler Controller reprogram, Relocate, repair or replace rain and freeze sensors, Sprinkler system valve replace or repair, Install or checking master valve, Replace broken spray or rotor nozzles, Repair or replace sprinkler irrigation system, Sprinkler system tune up, Irrigation system repair, Sprinkler system, electrical wire or solenoid problems, Irrigation system winterize, Drip irrigation repairs, Replace double check devices.
Thank you for selecting Clean Green, Inc. for your landscape irrigation contractor project! Our landscape irrigators are certified to meet state of Texas & local codes for sprinklers work, repair or install.
We can design, install and maintain irrigation system, landscape lighting, hardscape, etc. Good coverage It's essential for your turf. We can updating, replacement, service, repair any problem and maintain your existing landscape. if you are interested in new installation of irrigation or landscape, you are in the right place. Call Clean Green landscape contractor at 972-998-2076 Texas Irrigation License #LI15239
Winter weather has arrived and with many areas will see ice and snow this will increased risk to damage same of landscapes hard scapes irrigation systems trees shrubs ground covers and others landscaping items. We recommend to checking all of the sprinkler system items will be very important. This includes ensuring the landscape irrigation systems items are in good condition. These items should also be checked to insure they are operating properly and/or good condition. Lawn Service, Water saving, Winterizing, Fertilization, Irrigation System, Lawn sprinkler, Drip, Hydraulics, back flows, Updating foundation plantings, Replacement, Rain/Freeze Sensors, Stonework, Tree Service, Sod installation, Drainage System, Fences/Gates, Retaining walls, Patios/Decks, Arbors/Gazebos, Water Features, Outdoor Fireplace/Kitchens, Fire Pits, Fire Wood, Holiday Lighting and More.
Service Area: Clean Green, Inc. Landscape, Irrigation & lawn care. We service area in Denton, Dallas and Collin County areas. The boundaries of our service area are: North & South of Highway 380, West of Highway 75 Central Expressway, North & South - Loop 190 (President George Bush Toll way), East & West of Flower Mound, And our service area includes the following cities: Little Elm, Plano (North, south, east & west of 75) Frisco, Carrollton, Allen, McKinney, Coppell, Flower Mound, Lewisville, Corinth, Highland Village, Castle Hills, Oak Point, The Colony, Prosper, Providence, Savannah and North Dallas Fort Worth, TX.
Clean Green, Inc. is located in Little Elm, Texas. While based in North Dallas, TX. We are very active in the Cross Roads, Little Elm, Oak Point, Frisco, Denton, Plano, Lakewood Village, McKinney, Aubrey and Denton communities.
Lawns grown in shady soil require shorter water application. We encouranges to check irrigation sprinkler control units, rain & freeze sensors to prevent unnecessary use and to repair any water leaks.
Why spend your time doing what we do best? Call now to Clean Green, Inc. at 972-998-2076
We can help you determine your needs in anything of landscape irrigation maintenace, diagnostics, evaluation, electric troubleshooting for an unknown fault, timer repair or replacement, reprogramming sprinkler controller to operate the system, new battery, replace fuse, rewire control valve silenoide, indoor or outdoor controller install, electrical wire repair, locating broken wires under ground or above ground, rain and freeze sensor maintenance, repair and replacement, add spray heads, battery operator controller, 13 station controller commercial, insulation bags for backflow, install drain valves for backflow, install hazard backflow,install or replace double check valve device, marking heads mainline pipe control valve wires for new excavations, modify and/or rebuild irrigation system, cut and cap pipes, installation water well filters, pvc sleeve installation, concrete donut installation around sprinkler, sprinkler valve box replacement. sprinkler relocation, pop-up and/or rotor replacement, rotor nozzle and/or pop-up spray nozzle replacement, Pipe blockage clearing, removing debris inside dripper line and plc pipes, diaphragm and silenoide replacement, malfunctioning control valve repairs, locating buried control valves, locating under ground shut-off valve, Emergency water shut-off, wireless sensor installation,
hardscape construction, masonry repairs, landscaping lighting, Drainage solutions, watering irrigation, fountains, water falls, rock work, landscaping solutions, firewood, ponds, and much more. We supply all material
We can install and repair landscape and irrigation
The Clean Green Inc. smartest install rotor-turn your turf even green. Sprinkler head replace or relocated Checking irrigation system or sprinkler leak repairing Sprinkler Controller reprogram or upgrades Relocate, repair or replace rain and freeze sensors Sprinkler system valve replacement or repaired Install or checking sprinkler master valve Replace broken pop up spray or rotor nozzles Repair or replace sprinkler irrigation system Sprinkler system tune up or evaluation at low cost Irrigation system repair or maintenace Sprinkler system electrical wire or solenoid problems Irrigation system or lawn winterize Drip irrigation repairs or installed Replace double check or inspectio
We offer audits and/or irrigation systemtune-ups.
Commercial and residential properties Irrigation system tune-up service? Repair broken heads, straighten leaning sprinkler heads, adjust sprinklers that are overthrowing walk or pathways (don’t use the nozzle retainer screw too much, as this distorts the sprinkler distribution) and make sure the sprinklers have head to head coverage. Second, replace inefficient or outdated sprinkler heads. The most obviousupgrade is making sure the sprinklers have match precipitation rate (MPR) nozzles in them. Having uniform coverage and MPR nozzles will help accomplish this. Next, spray heads have a tendency to “mist” or have an extremely high precipitation rate. Replace them with a stream rotary nozzle. They will have a less tendency to mist and will lower the sprinkler precipitation rate. Rotors and sprays should never be installed on the same zone, but if they are, then installing a rotary nozzle will help bring the precipitation in-line with each other. Most manufacturers have developed better and more efficient nozzles for sprays and rotors; update the old nozzles with the new ones. If you have sprinklers that leak water after the zone is shut off, install a sprinkler with a check valve. This will prevent low head drainage. Excessive pressure is always a problem, especially with spray heads. Spray heads don’t operate at the same pressure as a rotor, so install Pressure Compensating (PC) Bodies, or PC Nozzles, PC Valves, etc. Bring the pressure down to the appropriate 30 PSI operating pressure and the spray heads will operate more efficiently, not to mention this will lower the homeowners’ water usage, too. Third, install sensors. One of the quickest returns on investment are sensors that prevent the irrigation system from turning duringa rainstorm or heavy winds, or when the soil is still wet. Only irrigate when conditions dictate the need. A flow sensor reads excessive flow. Excessive flow typically happens from a broken sprinkler head or a leaking pipe. Obviously, you should not irrigate in either scenario until the problem is fixed.
Installed Sensors turn the automatic watering system off when there are freezing temperatures, is proposed this also prevents possible hazardous situations such as ice forming on streets or sidewalks. The sensor read the amount of rain thus not over watering the plants and wasting water.
Fourth, drip irrigation is highly efficient compared to traditional irrigation system techniques. Most planting beds contain mulch,which absorbs and holds moisture. It’s better to irrigate from beneath it with drip irrigation, than from above where the water will have to seep through it. Also, drip irrigation allows you to pinpoint the water at the base of the plant in lieu of over-spraying the entire planting bed with spray head irrigation. Fifth, use an ET-based irrigation controller. ET stands for evapotranspiration, which is the sum of water loss through evaporationand the plant. If your controller is based on evapotranspiration rather than timed increments, your irrigation system scheduling will be much more efficient. The traditional timer controllers can’t change with the weather conditions, but an ET-based controller can and produces considerable water savings.
Master valve acts as a backup shut-off to control excess run-off in case a zone valve sticks wide open. For example, rain water harvesting collects rain water and uses it for irrigation. Connect the gutter downspouts to a common pipe. The common pipe will lead the rain water to a cistern or a holding tank. The cistern can distribute the water or just be a collection point. The holding tank collects the rain water and a small pump delivers this water to the irrigation system. Another example is collecting excessive rain fall from the gutters, then directing that rain to a depression in the soil called a rain garden. This water-holding garden will allow the rain to soak into the ground slowly. The holding garden is planted with plants that can sustain the excessive moisture for a few days. Water conservation is a great saving opportunity. The future is here and it’s all about conservation because no one wants the well to run dry.
Helping conserve water consumed in the irrigation of landscapes. It is not intended to be scientific or based on science. It is intended to inspire those that have lead the way in irrigation to keep leading the way, professionally and profitably.
P.O. Box 1628, Little Elm TX 75068 (Mailing Address)
Service Area Little Elm, Texas, Prosper, Texas, Denton, Texas and Surrounding Areas: Aubrey, Argyle, Allen, Carrollton, Cross Roads, Lake Dallas, Flower Mound, Frisco, Oak Point, The Colony, Mckenney, hickory Creek, Highland Village, Lewisville, North Dallas and north Fort Worth